Ogden Dunes Indiana Concrete Garage Floors – Salt Wear

Concrete Garage Floors in Ogden Dunes fail fast when a thin patch covers salt pits. We’ve pulled up slabs where that skim coat had popped off in sheets. The sand under the tires had ground the soft spots down to stone.

Winter driving starts the wear. Salt stays on the lake roads through the cold months. Then wind off the dunes pushes sand onto the same pavement. Both ride in on the tires and drop on the slab.

People call us when the surface dusts under a broom. Because the damage sits in the top of the slab, owners often try a coating first. When the concrete under it is already loose, that coating lifts with the paste.

Ogden Dunes, Indiana sits on the Lake Michigan shore. So garages here take wet cars through the cold months. Sand from the dunes sticks to the meltwater on the tires. After it dries, the next trip grinds that grit across the floor.

We see the same pattern on older garage slabs. The paste near the door goes pale. Small pits open up along the tire path. From the doorway the floor can still look even.

Concrete Garage Floors in Ogden Dunes After a Full Tear-Out

Finished garage slab with a smooth tire path — Concrete Garage Floors in Ogden Dunes

When the surface paste is gone, the work is a tear-out and a new pour. We break out the old slab and haul it off. Then we set the base and pour a floor meant for daily tires.

Cabe’s Concrete is a family owned and operated company. Our doors opened back in 2006. You can see finished slabs in our photo gallery. The photos show the broom finish and the open bay after the pour.

Salt holds moisture against the concrete. Freeze and thaw break the surface paste loose. Sand under the tires wears that loose paste away. After later winters the pits are wider. The slab below can still be thick.

Get A FREE Proposal Today!

Salt, Sand, and Concrete Garage Floors in Ogden Dunes

Pitted garage concrete with salt film and blown sand — Concrete Garage Floors in Ogden Dunes

Households in Ogden Dunes often keep the car inside. The drive home runs on roads that carry winter salt. So the last stop is the garage slab, and that’s where the sand and brine drop off.

The grit sits in the pits and rolls under the tires every time the car comes home. Because wind off the dunes keeps dropping fresh sand, the grit returns through the cold months. So the tire path stays rough even after a sweep of the middle.

A sealer over salt often comes off with the dust. We’ve peeled coatings off in the first warm stretch, with sand stuck in the film. Salt was still in the concrete on those jobs.

How We Replace Concrete Garage Floors in Ogden Dunes

Crew breaking out a worn garage slab for replacement — Concrete Garage Floors in Ogden Dunes

We mark the bay and break the old concrete out. Then we check the base before the new concrete goes in. After the pour, we put a broom finish on the surface so wet tires still have grip.

Trench cutting and a pour-back fit when the pits stay in one area. Soft paste across the whole approach means concrete removal and a new slab for that bay. We also place epoxy once the new slab has cured, if that’s the finish you want.

Concrete Garage Floors in Ogden Dunes come up on walkthroughs once the paste has left the stone. We look at the door track and the tire paths. Then we say whether a section pour-back will hold or the bay needs to come out.

Our crew has years of field time on floors of this kind. More on the company is on our About Us page. For example, we source the concrete we use. And we talk through the finish before we pour.

The visit covers the demolition and the new garage pour, plus haul-off when the bay is tight. When a service walk is worn from the same grit, we can add that concrete on the same trip. Details on related pours are with our concrete garage floors work.

We haul the broken slab away so the bay is clear for the truck. The new floor still takes salt on the tires and sand at the door.