Lake Station Indiana Concrete Demolition Companies

Lake Station sits on the flat lake plain of northwest Indiana, south of Lake Michigan. Winters here include freeze and thaw. That cycle reaches the concrete around a house every year. Driveways and basement floors on Lake Station homes pick up cracks that start small. Then those cracks open. We’ve pulled up slabs a homeowner had already patched. The crack had come back wider than the patch. Concrete Demolition Companies in Lake Station get the call after a patch has already failed.

People have called when a section rocks underfoot. Sometimes the garage door scrapes a high spot. After rain, water sits in a low corner. For a basement floor, a crack can run out from a wall. One side of the slab sits a little higher. So the next step is a breakout, and then a new pour.

Concrete Demolition Companies in Lake Station After the Old Slab Is Gone

New driveway slab after a full tear-out — Concrete Demolition Companies in Lake Station

After the breakout, the job is a clean rectangle of new concrete from the street to the garage. We form the edges and set the base. Then we pour to the thickness that drive or floor needs. We cut joints so the slab can move on straight lines. We plan that joint on a Lake Station driveway that meets an older apron. Because each pour moves on its own, the joint keeps a random crack from running into the new work.

Cabe’s Concrete is a family owned and operated company, and we’ve done this work since 2006. We don’t inflate the price of material to make a few extra dollars. When we lose a bid, it’s because we valued the hours in the tear-out and the base. So we plan the day to get in and out quickly and still leave a professional job. Those hours sit in the saw cuts and in the base under the new slab.

Get A FREE Proposal Today!

How Concrete Demolition Companies in Lake Station Break Out a Failed Slab

Crew member breaking a cracked driveway with a jackhammer — Concrete Demolition Companies in Lake Station

Once soil movement cracks a Lake Station driveway or basement floor past patching, the old slab has to be broken out before any new concrete can be placed. For example, we’ve seen that on drives that dipped along one edge. A filler in the crack lasts until the slab moves again. Then the crack opens, and the patch comes out with it.

The breakout starts with a saw cut where new concrete will meet concrete we are keeping. Then we break the failed area with a jackhammer on a small pad. But on a long driveway we bring in a machine. We load the chunks out the same day. After the old concrete is gone, we look at the soil under it. We add stone on soft spots before anyone sets a form. We do trench cutting and pour back on these floors.

Because the pieces are heavy, haul-off is part of the demolition. So it has to finish before the ready-mix truck is on the way. Leftover chunks in the stone will show up in the new surface. We clear the area down to a base we can compact.

Driveways and Floors for Concrete Demolition Companies in Lake Station

Broken concrete chunks beside a driveway tear-out — Concrete Demolition Companies in Lake Station

When we get a house visit in Lake Station, it often starts on the driveway. We’ve broken out garage floors on the same day as the drive. We’ve also pulled a service walk that settled away from the stoop. After we find a shattered apron edge, we take out a short run of curb so the new drive can meet a straight line. Upper walks come into the same plan when the walk above the drive has cracked through.

Concrete Demolition Companies in Lake Station cover that full tear-out and replace, from the first cut to the new finish. You can see the scope on our concrete demolition company services. The photo gallery shows finished drives after the old slab was gone. The about us page has the company background.

On basement floors, Concrete Demolition Companies in Lake Station cut the bad section so the break stays inside the lines. Then we pour back once the base is ready. Staff on these jobs have a lot of time in the field. So the saw cut and the breakout follow an order that protects the concrete we are leaving. The chunks have to leave through a door or a window opening, and we plan that path before the first cut.