Valparaiso Indiana Epoxy Flooring – Basement Slabs

A lot of homeowners hear a dusty basement floor and jump to a full tear-out. When the slab is still solid, Epoxy Flooring in Valparaiso lets you use the room. We walk the floor and check for movement. We tell you which way the work should go.

Older basements around Valparaiso, Indiana often came with a utility pour. The surface was never meant as a finished floor. So you get a rough trowel and a powder that follows you upstairs. After a wet spring we’ve found basement floors that felt damp underfoot. Because of that, people call us before they buy carpet or paint. We’ve swept floors that chalked the broom on the first pass.

Checking the Slab Before Epoxy Flooring in Valparaiso, Indiana

We start on our knees with a light and a straightedge. Hairline cracks that stay tight are common on an old interior slab. When a section rocks or sounds hollow, that area still needs to come out. A coating over a moving piece of slab fails with the concrete under it. We talk about concrete replacement, or a tear-out and a new pour. So we decide from the slab in front of us, plus the dust and roughness you already see.

For a solid slab, prep is most of the work. We grind the surface so the coating can grab. Then we pull the dust out before anything goes down. We’ve coated floors since our doors opened back in 2006. Epoxy is part of the decorative concrete we do every week. Colored concrete and acid stains come up on other jobs. On a basement we usually stay with a coating you can walk on and set shelves on.

But a wet floor changes the plan. When the slab is dark with moisture, we hold the coating and look again on a drier day. We’ve come back to basements in Valparaiso where the surface stayed damp. A shop vac and a fan were not enough on those floors. Because of that, we don’t open a kit that day. A failed coating means grinding it back off later.

Epoxy Flooring in Valparaiso, Indiana on a Floor You Can Use

Once the slab passes, you can use the basement as a room. A sweep takes the old powder off for good. So Epoxy Flooring in Valparaiso is the coating we use on that solid rough floor. We leave the walls alone unless you want a bigger plan on the same visit.

When a family is finishing the basement, other work can sit on the same visit. Bathroom remodeling comes up when the layout needs a bath down there. We also pour residential concrete when the old slab has to come out. After we quote the floor, we write the lines out one by one.

Prep on these basement jobs is loud for a day. The coating needs time before foot traffic. We tell you that window before we start. Because we take pride in the time a job actually takes, we name that window up front. Staff on the crew have a wealth of experience in the field. For example, a solid color hides old trowel marks on a patched slab.

We source products we know are the best available. But we still grind first, whatever color you pick. When you want to see other floors, our photo gallery has shots of finished work. Epoxy Flooring in Valparaiso still starts with that grind when you pick a different color.

If the slab has to go, we stay and do the removal and the new pour. Because we also handle upper walks and service walks, the outside path can join the visit. The coating path is part of our epoxy flooring work. Epoxy Flooring in Valparaiso goes on the same property as the flatwork we pour. The new pour, when you need one, uses the same crew.